規格 ナット (2)                                          SeekAtec

AN365 ナイロンセルフロック ナット

PROCUREMENT
SPECIFICATION
TITLE CLASSIFICATION
AN-N-5 NUT−SELF LOCKING,
250°F
STANDARD PART
AN365
FINE THREAD
Dash Numbers Tap
T
A
+.016
B
+.002
-.010
Steel Copper
Base Alloy
Aluminum
Alloy
1032 B1032 D1032 #10-32 NF-3 0.234 0.375
428 B428 D428 1/4-28 NF-3 0.312 0.438
524 B524 D524 5/16-24 NF-3 0.344 0.5
624 B624 D624 3/8-24 NF-3 0.453 0.563
720 B720 D720 7/16-20 NF-3 0.453 0.625
820 B820 D820 1/2-20 NF-3 0.594 0.75
918 B918 D918 9/16-18 NF-3 0.688 0.875
1018 B1018 D1018 5/8-18 NF-3 0.75 0.938
1216 B1216 D1216 3/4-16 NF-3 0.875 1.063
1414 B1414 D1414 7/8-14 NF-3 1.00 1.25
1614 B1614 D1614 1-14 NF-3 1.125 1.438
1812 B1812 D1812 1 1/8-12 NF-3 1.25 1.625
2012 B2012 D2012 1 1/4-12 NF-3 1.438 1.813
COARSE THREAD
440 B440 D440 #4-40 NC-2 0.141 0.25
632 B632 D632 #6-32 NC-2 0.172 0.312
832 B832 D832 #8-32 NC-2 0.234 0.344
All dimensions in inches.
(a) Minimum A not specified. Limited only by strength requirement of specification. For definition and application
of drawing status note see ANA bulletin No. 337. Add "A" after dash number for nuts having nonmetallic inserts.
MS20365 parts and AN365 parts of like dash numbers are universally, functionally and dimensionally interchangeable.
Add "C" after dash number for nuts fabricated entirely from metal.
Examples of part nos.: AN365-428 = 1/4-28 steel nut, either all metal or with nonmetallic insert.
AN365D428 = 1/4-28 aluminum alloy nut, either all metal or noinmetallic insert.
AN365B428A = 1/4-28 copper base alloy nut with nonmetallic insert
AN365-428C = 1/4-28 steel nut, all metal.
For installation instruction see drawing AND10068.
注:指示なきすべての寸法はインチ. 1インチ=24.5mm