| 規格 ワッシャ （１） SeekAtec |
MS20002 平ワッシャNAS1103,1303,6403, etc.用
|
 |
 |
| MS20002C/MS20002 WASHERS |
 |
|
| Thread Size |
MS Parts No. | A Dia |
B Dia |
C Dia |
D | Flatness | ||||||
| Counter- sunk |
Plain | Max | Min | Max | Min | Max | ||||||
| 1/4 | MS20002C4 | MS20002-4 | 0.531 | 0.26 | 0.252 | 0.344 | 0.334 | 0.078 | 0.007 | |||
| 5/16 | MS20002C5 | MS20002-5 | 0.593 | 0.324 | 0.315 | 0.406 | 0.396 | |||||
| 3/8 | MS20002C6 | MS20002-6 | 0.687 | 0.388 | 0.378 | 0.495 | 0.483 | |||||
| 7/16 | MS20002C7 | MS20002-7 | 0.781 | 0.451 | 0.441 | 0.557 | 0.543 | |||||
| 1/2 | MS20002C8 | MS20002-8 | 0.875 | 0.515 | 0.504 | 0.62 | 0.604 | |||||
| 9/16 | MS20002C9 | MS20002-9 | 0.968 | 0.579 | 0.568 | 0.687 | 0.667 | |||||
| 5/8 | MS20002C10 | MS20002-10 | 1.062 | 0.643 | 0.631 | 0.785 | 0.765 | 0.01 | ||||
| 3/4 | MS20002C12 | MS20002-12 | 1.25 | 0.77 | 0.757 | 0.91 | 0.89 | |||||
| 7/8 | MS20002C14 | MS20002-14 | 1.437 | 0.897 | 0.884 | 1.035 | 1.015 | |||||
| 1 | MS20002C16 | MS20002-16 | 1.625 | 1.025 | 1.01 | 1.16 | 1.14 | |||||
| 1-1/8 | MS20002C18 | MS20002-18 | 1.875 | 1.15 | 1.135 | 1.285 | 1.265 | |||||
| 1-1/4 | MS20002C20 | MS20002-20 | 2.125 | 1.275 | 1.26 | 1.447 | 1.427 | 0.094 | ||||
| 1-3/8 | MS20002C22 | MS20002-22 | 2.313 | 1.4 | 1.385 | 1.572 | 1.552 | 0.015 | ||||
| 1-1/2 | MS20002C24 | MS20002-24 | 2.5 | 1.525 | 1.51 | 1.697 | 1.677 | |||||
| MATERIAL: | Alloy steel | |||||||||||||
| HEAT TREAT: | 125,000 to 145,000 (MIL-H-6875) | |||||||||||||
| FINISH: | Cadmium plating, Type ll, Class 2 | |||||||||||||
| Washer face parallel within .002" inch | ||||||||||||||
| 注：指示なきすべての寸法はインチ、1インチ＝25.4mm | ||||||||||||||
 |
||||||||||||||